>-----Original Message-----
>From: Wouter van Ooijen [mailto:wouter@VOTI.NL]
>Sent: 13 April 2004 14:50
>To: PICLIST@MITVMA.MIT.EDU
>Subject: Re: [PIC:] 18F452 / 18LF452
>
>
>> The only paramater I've found that points a lower/worse spec
>for th LF
>> parts, is in table 17-1 on page 186 (DS39564B).
>
>As I read it you are correct: in this aspect the LF version
>seems to have a lower spec than the F version.
>
>Wouter van Ooijen

I asked my FAE about this sometime ago, and ISTR the specs are exactly the
same on the F and LF when operating at 5volts, but the spec's had to be
relaxed for working at low voltages, (i.e. if you stick to the conditions
shown for the F part in the table, the LF should meet those specs when run
at 5 volts).

Regards

Mike




=======================================================================
This e-mail is intended for the person it is addressed to only. The
information contained in it may be confidential and/or protected by
law. If you are not the intended recipient of this message, you must
not make any use of this information, or copy or show it to any
person. Please contact us immediately to tell us that you have
received this e-mail, and return the original to us. Any use,
forwarding, printing or copying of this message is strictly prohibited.
No part of this message can be considered a request for goods or
services.
=======================================================================
Any questions about Bookham's E-Mail service should be directed to
postmaster@bookham.com.

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.