Yes, there is a hole through the board.  Currently we have to solder two
wires in the hole for each board.

I'm looking for something that will be placed over the hole by our surface
mount machine so that we can just push the wire through the hole and won't
have to solder it.

-----Original Message-----
From: pic microcontroller discussion list
[mailto:PICLIST@MITVMA.MIT.EDU]On Behalf Of Alan B. Pearce
Sent: Thursday, April 08, 2004 11:29
To: PICLIST@MITVMA.MIT.EDU
Subject: Re: [OT:] surface mount locking tabs


>The other challenge is, it has to be surface mount.

I take it then that there is no hole in the PCB for the wire to go through
:))

>Is there any such thing?  I don't even know what to
>call it when searching for it.

"Cable Grip" ?

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.