Sounds like you had a power bump or other glitch that scrambled
the on board cache, so when the track was written back, it
was full of crud. (big drives cache whole tracks for speed).

It would be interesting to get the bad blocks report from the drive
to see how many blocks it substituted, and whether you still have
an ongoing bad blocks problem.

If the utility was able to format the drive with no appreciable increase
in bad blocks, you might want to check on your power supply (cold solder
joints). If there are a large number of bad blocks, I wouldn't trust
the drive to not suddenly start plowing the media with the heads.

Robert


"dr. Imre Bartfai" wrote:
>
> Hi,
>
> I do not know for this or other reason, but IBM has closed the mentioned
> plant some times ago. And as info for HDD reliability: I had a 40GB Maxtor
> HDD, which crashed very nasty: bad sectors, and a total mix up of an ext3
> filesystem, so practically no way to recover the data. However, I did not
> want to dump the drive so made a short look. Maxtor offers on their
> website a HDD repair program. I downloaded and ran it, and it cleaned up
> the drive perfectly. Since there (6 months) the drive runs without any
> problem (incl. badtracks). Misterious, eh?
>
> Regards,
> Imre
>
> On Mon, 5 Apr 2004, Michael Rigby-Jones wrote:
>
> > >-----Original Message-----
> > >From: Philip Pemberton [mailto:philpem@dsl.pipex.com]
> >
> > >The 75GXPs? I've got one of those in a fileserver. Update the
> > >firmware (there's a copy of the flash upgrader on IBM's
> > >website) and they're fine. I've also got a 35GXP which seems
> > >OK, too. The drive in my 386 is a 4GB Seagate U4 - 1999 fab
> > >date, still working fine.
> >
> > 75 and 60GXP.  The problem was isolated to drives made in one particular
> > plant (Hungary IIRC) and was down to build defect, so a firmware update is
> > not likely to help any dead drives.  Some peoples drives have lasted well
> > with no problems, but a huge number of them did not.
> >
> > Mike
> >
> >
> >
> >
> > =======================================================================
> > This e-mail is intended for the person it is addressed to only. The
> > information contained in it may be confidential and/or protected by
> > law. If you are not the intended recipient of this message, you must
> > not make any use of this information, or copy or show it to any
> > person. Please contact us immediately to tell us that you have
> > received this e-mail, and return the original to us. Any use,
> > forwarding, printing or copying of this message is strictly prohibited.
> > No part of this message can be considered a request for goods or
> > services.
> > =======================================================================
> > Any questions about Bookham's E-Mail service should be directed to
> > postmaster@bookham.com.
> >
> > --
> > http://www.piclist.com hint: To leave the PICList
> > mailto:piclist-unsubscribe-request@mitvma.mit.edu
> >
>
> --
> http://www.piclist.com hint: PICList Posts must start with ONE topic:
> [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads