Rick Regan <PICLIST@mitvma.mit.edu> wrote:

> I often use a setup where I use two ICDs for debugging
> on the same PC (an ICD1 with MPLAB 5.70 and an ICD2
> with MPLAB 6.4).  Does anyone know if it is possible to
> run two instances of MPLAB 6.4 - each with its own
> ICD2 - on the same PC at once?

    It used to be possible to run two PICMasters (the Microchip
    emulator that was eventually replaced by the ICE2000) on the same
    PC; as I recall, there was an option in one of MPLAB's menus to
    synchronize the two emulators... And it even kinda worked most of
    the time.

    No idea whether the capability still exists, though, or whether
    it'd work with two ICD2s.

    -Andy

=== Andrew Warren -- aiw@cypress.com
=== Principal Design Engineer
=== Cypress Semiconductor Corporation
===
=== Opinions expressed above do not
=== necessarily represent those of
=== Cypress Semiconductor Corporation

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu