> So the timing facility in the MPLAB simulator will work
> correctly with an SX
> executing 1 instruction per cycle instead of the PIC 1
> instruction per 4 clock
> cycles? Also the difference in hardware stacks?

I guess you have a different idea about 100% SX or what you want MPLAB
to do. I think I never used the simulator, so for me that is outside
100% :) And you can just run (corrcetly simulated) 12-bit core code
unaltered on an SX, including divide-by-4 speed and 2-level stack. Or
use the assembler etc. to develop divide-by-1 9-level stack SX code.

Wouter van Ooijen

-- -------------------------------------------
Van Ooijen Technische Informatica: www.voti.nl
consultancy, development, PICmicro products

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu