Hello Jan-Erik, > I did't found anything. But anyway, you can send it directly to > jan-erik dot soderholm at telia dot com. strange. It seens I've made a mistake and haven't sent the log. Here it is: /////////////////////////////////////////LOG START XWisp2 version 1.3.03 (Mar 24 2004, LCC) File CC-MKII.HEX loaded and Intel Hex format conforming Total of program and data memory: 32645 bytes Programmer Wisp628, firmware version 1.09 Detected target: 18F452 rev 06 ('0426') Target erased Transferring image to 18F452 via Wisp628 Transferring program 006780 : 2020 006800 : 322e 006880 : 2020 006900 : 5363 006980 : 4661 006A00 : 2020 006A80 : 3133 006B00 : 2020 006B80 : 322e 006C00 : 2020 006C80 : 4365 006D00 : 4d6f 006D80 : 2020 006E00 : 3133 006E80 : 2020 006F00 : 322e 006F80 : 2020 007000 : 4573 007080 : 4d6f 007100 : 2020 007180 : 3133 007200 : 2000 007280 : 0000 007380 : 1717 007400 : 0000 007480 : 0000 007500 : 0000 007580 : 0000 007600 : 0000 007680 : 0000 007700 : 0000 007780 : 0000 007800 : 0000 007880 : 0000 007900 : 0000 007980 : 0000 007A00 : 0000 007A80 : 0000 007B00 : 0000 007B80 : 0000 007C00 : 0000 007C80 : 0000 007D00 : 0000 007D80 : 0000 007E00 : 0000 007E80 : 0000 007F00 : 0000 007F80 : 0000 OK! Verifying program 006800 : 322E 006900 : 5363 006A00 : 2020 006B00 : 2020 006C00 : 2020 006D00 : 4D6F 006E00 : 3133 006F00 : 322E 007000 : 4573 007100 : 2020 007200 : 2000 007400 : 0000 007500 : 0000 007600 : 0000 007700 : 0000 007800 : 0000 007900 : 0000 007A00 : 0000 007B00 : 0000 007C00 : 0000 007D00 : 0000 007E00 : 0000 007F00 : 0000 OK! Transferring data OK! Verifying data OK! Transferring ID OK! Verifying ID OK! Transferring fuses 300000 : 005a OK! Verifying fuses 000000 : 0027 OK! Write-Verify terminated successfully in 11.25 seconds Putting target in run mode XWisp2 terminated successfully in 12.60 seconds /////////////////////////////////////////LOG END > Could you try with a small(er) HEX file ? Yes, same problem: /////////////////////////////////////////LOG START XWisp2 version 1.3.03 (Mar 24 2004, LCC) File CC-MKII.HEX loaded and Intel Hex format conforming Total of program and data memory: 9285 bytes Programmer Wisp628, firmware version 1.09 Detected target: 18F452 rev 06 ('0426') Target erased Transferring image to 18F452 via Wisp628 Transferring program 006780 : 2020 006800 : 322e 006880 : 2020 006900 : 5363 006980 : 4661 006A00 : 2020 006A80 : 3133 006B00 : 2020 006B80 : 322e 006C00 : 2020 006C80 : 4365 006D00 : 4d6f 006D80 : 2020 006E00 : 3133 006E80 : 2020 006F00 : 322e 006F80 : 2020 007000 : 4573 007080 : 4d6f 007100 : 2020 007180 : 3133 007200 : 2000 007280 : 0000 007380 : 1717 007400 : 0000 007480 : 0000 007500 : 0000 007580 : 0000 007600 : 0000 007680 : 0000 007700 : 0000 007780 : 0000 007800 : 0000 007880 : 0000 007900 : 0000 007980 : 0000 007A00 : 0000 007A80 : 0000 007B00 : 0000 007B80 : 0000 007C00 : 0000 007C80 : 0000 007D00 : 0000 007D80 : 0000 007E00 : 0000 007E80 : 0000 007F00 : 0000 007F80 : 0000 OK! Verifying program 006800 : 322E 006900 : 5363 006A00 : 2020 006B00 : 2020 006C00 : 2020 006D00 : 4D6F 006E00 : 3133 006F00 : 322E 007000 : 4573 007100 : 2020 007200 : 2000 007400 : 0000 007500 : 0000 007600 : 0000 007700 : 0000 007800 : 0000 007900 : 0000 007A00 : 0000 007B00 : 0000 007C00 : 0000 007D00 : 0000 007E00 : 0000 007F00 : 0000 OK! Transferring data OK! Verifying data OK! Transferring ID OK! Verifying ID OK! Transferring fuses 300000 : 005a OK! Verifying fuses 000000 : 0027 OK! Write-Verify terminated successfully in 11.25 seconds Putting target in run mode XWisp2 terminated successfully in 12.57 seconds /////////////////////////////////////////LOG ENDING > I think I'll make a "debug" version with more logging > using the "log" command. I'll try to upload it later today. > Could be usable if someone else runs into problems, and > for myself... Good, send it to me and I'll beta test it. > Just a check, you *can* flash the same file using > Wisp628 and the Python based XWisp, right ? Sure, it works flawlessly. > And at last, would it be possibly to get a copy of the HEX file > that doesn't work so I could debug myself ? If so, you could > mail it to the mail address above. if not, well, I understand :-) > I have a few 452's I could try on. I'll send it privatelly to you. Thank you, Brusque -- --------------------------------------------------------------------- Edson Brusque C.I.Tronics Lighting Designers Ltda Research and Development Blumenau - SC - Brazil http://www.suporte.ind.br/ryan/netiqueta.htm www.citronics.com.br --------------------------------------------------------------------- -- http://www.piclist.com#nomail Going offline? Don't AutoReply us! email listserv@mitvma.mit.edu with SET PICList DIGEST in the body