Edson Brusque wrote :

> I'm trying your Xwisp2 on a W2k-SP4 machine.
>
> It's working ok with a PIC16F628 but not with PIC18F452.

Hi !.
Many thanks for your information !

> Bellow is the log...

I did't found anything. But anyway, you can send it directly to
jan-erik dot soderholm at telia dot com.

Could you try with a small(er) HEX file ?

I think I'll make a "debug" version with more logging
using the "log" command. I'll try to upload it later today.
Could be usable if someone else runs into problems, and
for myself...

Just a check, you *can* flash the same file using
Wisp628 and the Python based XWisp, right ?

And at last, would it be possibly to get a copy of the HEX file
that doesn't work so I could debug myself ? If so, you could
mail it to the mail address above. if not, well, I understand :-)
I have a few 452's I could try on.

Best Regards
Jan-Erik.


> I've made with DOS redirection ('>PIC18F452.log'). As you can
> see, Xwisp2 starts programming at address 0x6780.
>
>      The program I'm trying to burn on the PIC18F452 is really BIG.
> Almost all 32k full. It was compiled with CCS-PICC.
>

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body