On Mon, 22 Mar 2004 13:07:10 -0000, Alan B. Pearce wrote:
> > 3. MPLAB ICD 2.  This sounds like it might work, but
> > is a bit expensive.  Also, I'm not sure if it supports
> > 18Fxxx chips or whether I need additional parts.
>
> Well it certainly supports the 18Fxxxx chips. it is the only way (currently)
> to get in circuit debugging.

Not exactly true. CCS sells an ICD (both serial and USB models) that
debug and in-circuit program the 16F and 18F parts. It's about $75 USD
and I like it a whole lot better than ICD2, it's a lot faster
programming and debugging.

http://www.ccsinfo.com/icds.shtml

Matt Pobursky
Maximum Performance Systems

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads