Hi Edward I have tryed that and the Scope does not see the files. regards Luis -----Original Message----- From: Edward Gisske [mailto:gisske@OFFEX.COM] Sent: 19 March 2004 13:14 To: PICLIST@mitvma.mit.edu Subject: Re: [EE] Lecroy Scope Luis, You could reload them into the scope and then resave them as a .bmp file. Look under the utilities:hardcopy menu. I think the .prt files are HPGL format for vector plotters. Edward Gisske, P.E. Gisske Engineering 608-523-1900 gisske@offex.com ----- Original Message ----- From: "Luis Moreira" To: Sent: Friday, March 19, 2004 6:59 AM Subject: [EE] Lecroy Scope > Hi Guys > I just got some wave forms on a Lecroy Scope and saved them to floppy the > problem is that the files have an extension .PRT, does anyone knows what to > use to: read them and convert them into .BMP or even .JPG. > regards > Luis > > -----Original Message----- > From: redtock8 [mailto:redrock8@ALLTEL.NET] > Sent: 18 March 2004 00:27 > To: PICLIST@mitvma.mit.edu > Subject: Re: [PIC:] Programming SOIC chips before soldering > > > Jim, > I would like to do this. Where do you get spring loaded > pins etc? Could you provide more info on how to do this? > > Albert > > redrock8@alltel.net > > -- > http://www.piclist.com hint: PICList Posts must start with ONE topic: > [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads > > -- > http://www.piclist.com hint: The PICList is archived three different > ways. See http://www.piclist.com/#archives for details. -- http://www.piclist.com hint: The PICList is archived three different ways. See http://www.piclist.com/#archives for details. -- http://www.piclist.com hint: PICList Posts must start with ONE topic: [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads