=20
Thanks,

Actually all diagrams has Pin 1 as VDD, but Diagram 2 has Pin 1 on the
right, and Diagram 1 and 3 has it on the left (if you look from the back
with the connector at the top).

Did you run your PIC at 3V too? And did you use any resistors between =
the
PIC output pins and the LCD pins? Any other components for the =
supply/reset
pins? :-)

  _____ =20

Andr=E9 Miller =09

> This diagram shows Pin 1 on the left, with the connector facing up and =

> the display facing away from you:
> http://users.skynet.be/bk317494/datasheet/nokia_3310_LCD.jpg

This is the pin out I used when I was working with the LCD.

> All of them has the descriptions of the pins the same, but the second=20
> diagram has the pinouts numbered from the opposite side. Which ones=20
> are correct?

If it's the same description, but with different numbering (ie. Diagram =
1
has Pin 1 as VDD, but Diagram 2 has Pin 8 as VDD) it doesn't really =
matter,
does it? :)

--
Michael Davidson

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.