Depends on what your willing to pay....because there are services that can and will program these for you. Check with Arrow Electronics or your local distributor and see what they can do for you. >From: Mike Harrison >Reply-To: pic microcontroller discussion list >To: PICLIST@MITVMA.MIT.EDU >Subject: Re: [PIC:] Programming SOIC chips before soldering >Date: Wed, 17 Mar 2004 10:28:36 +0000 > >On Wed, 17 Mar 2004 02:00:52 -0800, you wrote: > > >Hi all, > >I am in the process of switching to SMT parts to save > >on endless drilling for a run of devices (100+) and to > >further reduce the size of the device. I am working > >with 12f629s, so its only a 8 pin SOIC, but I need a > >way to program the buggers before I solder them in the > >circuit. ICSP is not really an option because of the > >size and compactness of the device (even bare board). > >There is definitly no room for headers. > > > >Is there any kind of socket or clip or something I can > >use to connect to the bare SOICs long enough to > >program and verify them? The only thing I have found > >is for DIPs. > > > >Any experiences with this is apreciated :-) > > > >TIA, > > Ben Hencke >You can get SOIC test clips - 3M do one (923650-08)- not hugely expensive - >about $15-20 >Look at order code 178-278 at www.farnell.com/uk > > > > > >-- >http://www.piclist.com hint: PICList Posts must start with ONE topic: >[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads _________________________________________________________________ Find a broadband plan that fits. Great local deals on high-speed Internet access. http://click.atdmt.com/AVE/go/onm00200360ave/direct/01/ -- http://www.piclist.com hint: PICList Posts must start with ONE topic: [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads