> what is the exact command that you are sending to MC35?

The sequence I'm using is at

http://home.clear.net.nz/pages/joecolquitt/mc35.html

> You are working in Text or PDU mode?

Text

The problem is that there isn't always a concluding OK coming
from the MC35. The diagram at the above address shows the
OK included on the top memory dump, and OK missing in the
memory dump below that. And it appears the MC35 just sends
garbage instead of terminating the message properly as it does
in the top example

Everything else I've tried seeems to be working OK (sending SMS
from the MC35 to a cellphone or e-mail address for example). Part
of the problem is that there are so many parameters for commands
in the AT Manual and I'm fairly ignorant of what they all do. The lack
of examples and very technicalese descriptions don't help. It's been
on hold for a few days and I did plan to look up a user group

The problem with CMGL hasn't manifested itself (yet) using Hyper-
terminal and the same set-up commands, which is puzzling. Electrically
the PIC+MAX232 and the PC are quite close. I've looked at the data
stream with an oscilloscope and logic analyser but can'[t detect any
kind of breakdown. The MC35 itself seems to be the source of the bad
data

If you can see anything wrong or missing I'd be grateful for any advice

thanks

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads