Sure, just make a header with the same pinout as the PIC and
run the leads out to your target board.

Just make sure to keep the current consumption down and
probably don't connect the VCC on your target to the VCC
on the PICSTART+.  Keep the wires short, as short as possible.

It has been done, but you're almost always better off just
getting an ICD2.

Mike H.

>From: jisak <jisak@NETCOURRIER.COM>
>Reply-To: pic microcontroller discussion list <PICLIST@MITVMA.MIT.EDU>
>To: PICLIST@MITVMA.MIT.EDU
>Subject: [pic]: ICSP
>Date: Mon, 15 Mar 2004 12:43:00 +0100
>
>Hi all
>
>Do you know if it is possible to make ICSP with Picstart+ for 12fxxx,
>and how ?
>
>Thank you
>
>--
>http://www.piclist.com#nomail Going offline? Don't AutoReply us!
>email listserv@mitvma.mit.edu with SET PICList DIGEST in the body

_________________________________________________________________
Fast. Reliable. Get MSN 9 Dial-up - 3 months for the price of 1!
(Limited-time Offer) http://click.atdmt.com/AVE/go/onm00200361ave/direct/01/

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body