On 14 Mar 2004 at 1:05, Anthony Van Herrewege wrote:
> The Eagle files are here:
> http://members.lycos.nl/anthonyvh/etc/jdm.zip
> The schematic I used for this can be seen here:
> http://members.lycos.nl/anthonyvh/index.php?page=jdm

I only looked quickly at the schematic. You have D5 as 8.7V, it's 8.2V on the
one I built, but it may not matter much.

I think you said you are using Win XP. You should try installing the ICProg
NT/2000 device driver. Go to:-

http://www.ic-prog.com/download.html

and download the IC-Prog NT/2000 driver. Unzip it and put the file icprog.sys
in the same directory as icprog.exe (should be \Program Files\IC Prog).

Run ICProg. Go to Settings\Options\Misc and tick Enable NT/2000/XP driver
and tick OK. I think then it tells you first it's not installed then asks
if you want to install it. Do that.

Then go to Setting\Hardware and choose Direct I/O interface. You will
probably have to change the I/O delay to get it working reliably on a
given machine.

--
Brent Brown, Electronic Design Solutions
16 English Street, Hamilton, New Zealand
Ph/fax: +64 7 849 0069
Mobile/txt: 025 334 069
eMail:  brent.brown@clear.net.nz

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.