Yes you are right...0Vcc:)
Anyhow, I solve the problem and now everything is OK.
I hate to say but I must recognise that was my fault.
I count PIC's pin as follow:
From the key left up to down pin 1 to 9 and from the left up to down 10
to 18...instead of 18 to 10:((((
My luck were that VDD and VSS are in the middle so doesn't matter from
were you start counting, you can't broke the chip instead of switching +
with -.
Programmer is OK, blinking LED project is working, also Flash LED
project(with 8 LEDs)is working and make some "tunning" on it:) addapt
the timer routine to 4MHz qurtz.
Now I'm ready to learn and try PICs programs.

Thanks to all who your help me.


Cristian=20

-----Original Message-----
From: pic microcontroller discussion list
[mailto:PICLIST@MITVMA.MIT.EDU] On Behalf Of Wouter van Ooijen
Sent: Thursday, March 11, 2004 23:57
To: PICLIST@MITVMA.MIT.EDU
Subject: Re: [PIC]: getting started

> If I'll get verify OK than sould be OK from
> programming point of view.

Being paranoid is good for a programmer (actually for any kind of
engineer). I would trust the programming only if I can read back the
content of the chip and it matches the original .hex file exactly.

> - pin 5 to -5Vcc.

I hope you mean 0 Volt? A difference of 10 Volt is not healthy for a
PIC!

Wouter van Ooijen

-- -------------------------------------------
Van Ooijen Technische Informatica: www.voti.nl
consultancy, development, PICmicro products

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu


-------------------------------------------------------------------------=
------
The content of this communication is classified as Mobifon SA Romania =
Confidential and Proprietary Information.The content of this =
communication is intended solely for the use of the individual or entity =
to whom it is addressed and others authorized to receive it. If you are =
not the intended recipient you are hereby notified that any disclosure, =
copying, distribution or taking any action in reliance on the contents =
of this information is strictly prohibited and may be unlawful. If you =
have received this communication in error, please notify us immediately =
by responding to this communication then delete it from your system. We =
appreciate your assistance in preserving the confidentiality of our =
correspondence. Thank you.

Prezentul mesaj constituie o Informatie confidentiala si este =
proprietatea exclusiva a  MobiFon S.A.. Mesajul se adreseaza numai =
persoanei fizice sau juridice mentionata ca destinatara, precum si altor =
persoane autorizate sa-l primeasca. In cazul in care nu sunteti =
destinatarul vizat, va aducem la cunostinta ca dezvaluirea, copierea, =
distribuirea sau initierea unor actiuni pe baza prezentei informatii =
sunt strict interzise si atrag raspunderea civila si penala. Daca ati =
primit acest mesaj dintr-o eroare, va rugam sa ne anuntati imediat, ca =
raspuns la mesajul de fata, si sa-l stergeti apoi din sistemul dvs. =
Apreciem si va multumim pentru sprijinul acordat in pastrarea =
confidentialitatii corespondentei noastre.=20
-------------------------------------------------------------------------=
------

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads