advanced circuits www.4pcb.com could probably do that. Call them and ask them. Their quote machine only works with square boards, but they can probably quote it as a 1" X 1" board. -- Lawrence Lile Senior Project Engineer Toastmaster, Inc. Division of Salton, Inc. 573-446-5661 voice 573-446-5676 fax Denny Esterline Sent by: pic microcontroller discussion list 03/11/2004 11:57 AM Please respond to pic microcontroller discussion list To: PICLIST@MITVMA.MIT.EDU cc: Subject: [OT:] Round PCB supplier Looking for recommendations for a supplier to make a small PCB. DS, plated through, no detail smaller than 12 mills, but the outline has to be a one inch diameter circle. (more than 1.040 won't fit in the hole) Dozen or so to start, maybe a few hundred to a thousand eventually. Supplier suggestions? Expected costs? (I've never had anything but rectangles before) Thanks, -Denny -- http://www.piclist.com hint: To leave the PICList mailto:piclist-unsubscribe-request@mitvma.mit.edu -- http://www.piclist.com hint: To leave the PICList mailto:piclist-unsubscribe-request@mitvma.mit.edu