Richard S wrote:

>All LED's work except the one on port RB3 ( this is pin24 and is a shared funtion with PGM). It is counting all the way up. Only way to reset to zero is reflash POR does not reset to zero.
>
>
>
If you have LVP mode enabled, then pull this pin low with a 10K resistor
or similar.

Otherwise disable LVP in the FUSES and you can use it as a standard port
pin.

regards

Tony

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.