--
  There is networking devices that will basically use wireless technology
to communicate be tween the different devices.  If you have a room that
isn't with in the range of the hub, you can get these repeaters that grab
the signal off the network tat is created over the power system in your
house-  The over all network is wireless, but the power system is used to
supplement it.

Communication over the power system isn't that great.  your only moving
with a carrier signal of 60Hz and you have allot of noise.

If using one of these devices isn't what you wanted to do, then you'll
have to make your own devise that will do this-  I don't really recommend
it-



JoE

On Mon, 8 Mar 2004, Thys wrote:

> Have a look at www.intellon.com
>
> -----Original Message-----
> From: pic microcontroller discussion list
> [mailto:PICLIST@mitvma.mit.edu]On Behalf Of 0xDEADBEEF
> Sent: 08 March 2004 05:12
> To: PICLIST@mitvma.mit.edu
> Subject: [OT]: transmitting data via power line
>
>
> Does somebody has links to resources about circuit designs for transmitting
> data via the power line network inside a building?
>
> MfG,
>
> Do.Pe.
>
> --
> http://www.piclist.com hint: PICList Posts must start with ONE topic:
> [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads
>
> ---
> Incoming mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.596 / Virus Database: 379 - Release Date: 26/02/2004
>
> --
> http://www.piclist.com hint: The list server can filter out subtopics
> (like ads or off topics) for you. See http://www.piclist.com/#topics
>

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics