Omega wrote:

>
> >Are you using a small cap from the Mclr down to ground with a
> pullup on the
> >pin?
>
> Wouldn't it be easier to just enable the POR (Power On Reset)
> feature (which
> the mentioned PIC18F452 has)?

I see where you are coming from, but what I actually meant here was to
produce a passive low pass filter to reduce any noise that might be present
on the Mclr pin.  It wasn't intended as a POR alternative.

Brian.

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu