I NEED:

I have a client that needs a project done faster than I can personally
do it. The project is in PIC16F MPASM, absolute or relocatable mode, and
you WON'T need hardware to do it. Sorry, NO high-level languages.

There are two interlocking PICs, and one mostly generates timing
signals, while the other processes data.

I'm breaking up this elephant into small "edible" pieces. These pieces
are purely 16F firmware, as I have written the hardware drivers. The
routines you write will probably run in almost any PIC16F, but in
general they will be tested on a PIC16F876 and 876A.

I will provide a specification for the routine(s), and the coder will
bid it. When the code arrives, I will test it on MPLAB SIM then on my
ICE2000. The coder will get paid PERSONALLY by my client within 24 hrs
of my receiving a working source, by paypal or Western Union, anywhere
in the world. If the routine is complex (and some are) we are willing to
pay a partial fee as long as I see evidence of some good work. However,
we will start you off slow.

Just making a working routine WON'T be enough. It will have to be
messaged until the routines have been minimized for SPEED and minimal
RAM. Our overall format is to keep the number of committed registers to
a minimum, while using global variables in a routine then discarding
them. The source will be documented so that I understand how it works,
and so I can verify that it does what I expected it to do. It also needs
to identify how many variables are used, max number of machine cycles
used, and whether the routine will reside in an interrupt.

Because you need nothing more than a sharp mind, some experience, and a
copy of MPLAB, your overhead is low- so we'd expect your time to be
reasonable, especially since we are paying immediately, too.

YOU ARE:

an experienced PIC MPASM programmer or coder with skills. You will have
to provide at least one well-written, minimized routine as an example.

You can be located anywhere in the world as long as we can communicate
easily; i.e. read and write English (well, whatever we speak here in
Arizona, anyway).

and, you are AVAILABLE.

Reply personally, NOT on the PICLIST to:

Bob Axtell
engineer@cotse.net

--

  Replies: NOTE-Script, EXE,BAT and COM
     files will be rejected by server
              --------------
                Bob Axtell
        PIC Hardware & Firmware Dev
          http://beam.to/baxtell
              1-520-219-2363

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.