At 11:21 PM 2/28/2004 -0500, you wrote:


>Cathode of the zener to pin 9, anode to ground (or +12 is better,
                          ^^^^^
Should read pin 10.


>actually, provided the zener voltage isn't too high). You could just
>connect pin 8 to 12V, but that would reduce the performance of the
       ^^^^^^^^
pin 10.

I think I'll quit now, not used to this much beer anymore. I'm also
working on a design with the ULN2003A driver..

Best regards,

Spehro Pefhany --"it's the network..."            "The Journey is the reward"
speff@interlog.com             Info for manufacturers: http://www.trexon.com
Embedded software/hardware/analog  Info for designers:  http://www.speff.com

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.