On Thu, 26 Feb 2004, Ovidio Vazquez Jara wrote:
> I've used 18F458 and 18F258 in a recent project. I remember the CAN module
> being a bit tricky to use and initialize. Also, the datasheet wasn't very
> clear to me.
>
> I didn't use the AN853 library, but be careful: it may have bugs (AN738 had).
>
> Check carefully for initialization registers (TRISC, bit timing regs, etc).
> I bet you didn't initilize CIOCON !.

Thank you.  It was the ENDRHI bit in the CIOCON than was the problem.
I needed to set it.  Thanks again.
        -- Robert

--
    Robert James Kaes    ---  Flarenet Inc.  ---    (519) 426-3782
                 http://www.flarenet.com/consulting/
      * Putting the Service Back in Internet Service Provider *

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics