MPLAB 6.4


>From: Colombain Nicolas <colombain.nicolas@WANADOO.FR>
>Reply-To: pic microcontroller discussion list <PICLIST@MITVMA.MIT.EDU>
>To: PICLIST@MITVMA.MIT.EDU
>Subject: Re: [PIC:] updates of the view window
>Date: Thu, 26 Feb 2004 20:54:54 +0100
>
>Hi,
>
>From which tool view window are talking about ?
>Regards,
>Nicolas
>
>
>----- Original Message -----
>From: "al smith" <micro_eng2@HOTMAIL.COM>
>To: <PICLIST@MITVMA.MIT.EDU>
>Sent: Thursday, February 26, 2004 12:20 AM
>Subject: [PIC:] updates of the view window
>
>
> > While single stepping thru the code, I have both the TRIS and PORT
>registers
> > in the view window.  However, I notice when I simply do a
> > movlw 0x04
> > movwf PORTB
> >
> > I don't always see it update on the view window, and I am following with
>a
> > banksel TRISB
> > movlw 0x00
> > movwf TRISB
> >
> > I then sometimes see a change in PORTB.  Since the TRIS and DATA are
>both
> > registers, it wouldn't seem correct that the read back of the value
>stored
> > in the PORT register is affected by the TRIS value.
> >
> > I'm also only getting around .5V for a high, driving into a gate, for a
> > logic high level.  Wierd stuff going on...
> >
> > _________________________________________________________________
> > Say  good-bye  to spam, viruses and pop-ups with MSN Premium -- free
>trial
> > offer! http://click.atdmt.com/AVE/go/onm00200359ave/direct/01/
> >
> > --
> > http://www.piclist.com hint: To leave the PICList
> > mailto:piclist-unsubscribe-request@mitvma.mit.edu
>
>--
>http://www.piclist.com hint: PICList Posts must start with ONE topic:
>[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads

_________________________________________________________________
Take off on a romantic weekend or a family adventure to these great U.S.
locations. http://special.msn.com/local/hotdestinations.armx

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics