Hi, From which tool view window are talking about ? Regards, Nicolas ----- Original Message ----- From: "al smith" To: Sent: Thursday, February 26, 2004 12:20 AM Subject: [PIC:] updates of the view window > While single stepping thru the code, I have both the TRIS and PORT registers > in the view window. However, I notice when I simply do a > movlw 0x04 > movwf PORTB > > I don't always see it update on the view window, and I am following with a > banksel TRISB > movlw 0x00 > movwf TRISB > > I then sometimes see a change in PORTB. Since the TRIS and DATA are both > registers, it wouldn't seem correct that the read back of the value stored > in the PORT register is affected by the TRIS value. > > I'm also only getting around .5V for a high, driving into a gate, for a > logic high level. Wierd stuff going on... > > _________________________________________________________________ > Say good-bye to spam, viruses and pop-ups with MSN Premium -- free trial > offer! http://click.atdmt.com/AVE/go/onm00200359ave/direct/01/ > > -- > http://www.piclist.com hint: To leave the PICList > mailto:piclist-unsubscribe-request@mitvma.mit.edu -- http://www.piclist.com hint: PICList Posts must start with ONE topic: [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads