Err, MS Outlook modified my subject line... back on thread now... sorry.

> -----Original Message-----
> From: pic microcontroller discussion list
> [mailto:PICLIST@MITVMA.MIT.EDU]On Behalf Of Gustaf J. Barkstrom
> Sent: Tuesday, February 24, 2004 9:56 PM
> To: PICLIST@MITVMA.MIT.EDU
> Subject: Re: ] My first PCB production
>
>
> > I'm about to order a couple of PCBs from Olimex, this is the first time
> > ever I've done this, and just wondered what the common mistakes maybe?
>
> A couple of boards, as in two? I have been following this thread, but as
> I've gotten
> back into electronics in the last couple months, I've rounded up items
> to make my own PCBs.  Is the project sufficiently complext that you can't
> make the boards yourself?  If you are only making a couple of boards, I
> would
> invest in some small supplies to do it yourself.  Of course, there are two
> factors that have allowed me to not need PCB services yet: 1) I have lots
> of extra time, no wife, no children, etc.; 2) I don't have any really
> complex
> board designs (yet).  And of course, my boards are only 1 or 2 sided, no
> silkscreen,
> and so forth.
>
> Gustaf
>
> <snip>
> >
> > Ed
> >
> > --
> > http://www.piclist.com#nomail Going offline? Don't AutoReply us!
> > email listserv@mitvma.mit.edu with SET PICList DIGEST in the body
> >
>
> --
> http://www.piclist.com#nomail Going offline? Don't AutoReply us!
> email listserv@mitvma.mit.edu with SET PICList DIGEST in the body
>

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body