> I'm about to order a couple of PCBs from Olimex, this is the first time
> ever I've done this, and just wondered what the common mistakes maybe?

A couple of boards, as in two? I have been following this thread, but as
I've gotten
back into electronics in the last couple months, I've rounded up items
to make my own PCBs.  Is the project sufficiently complext that you can't
make the boards yourself?  If you are only making a couple of boards, I
would
invest in some small supplies to do it yourself.  Of course, there are two
factors that have allowed me to not need PCB services yet: 1) I have lots
of extra time, no wife, no children, etc.; 2) I don't have any really
complex
board designs (yet).  And of course, my boards are only 1 or 2 sided, no
silkscreen,
and so forth.

Gustaf

<snip>
>
> Ed
>
> --
> http://www.piclist.com#nomail Going offline? Don't AutoReply us!
> email listserv@mitvma.mit.edu with SET PICList DIGEST in the body
>

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body