----- Original Message -----=20 From: "Jan-Erik Soderholm" To: Sent: Friday, February 20, 2004 6:58 PM Subject: Re: [PIC]: Oscillator mode Jan-Erik wrote: > Hi. > Why do you need to do this ? > Isn't it easier just to set the config bits correctly ? > Anyway, I'd guess that it will not work, and if it does, > it's outside of the data sheet specs anyway... Hi This is the case: I have downloaded a program from Elektor and in the asm file can=B4t I see any CONFIG line at all! When I=B4m loaded my IC programmer with the hex file showes following: Oscillator =3D RC WDT =3D on PWRT =3D off CP =3D off Do I have to complete the asm file with a correct CONFIG line to get the best function? Regards =C5keN > http://www.piclist.com hint: To leave the PICList > mailto:piclist-unsubscribe-request@mitvma.mit.edu >=20 -- http://www.piclist.com hint: PICList Posts must start with ONE topic: [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads