it's OK!!!!!! The AC wall pack must be unplugged and so XP accept the driver As we say in France "Ouf!!" thank for all you messages ----- Original Message ----- From: "Tom" To: Sent: Friday, February 20, 2004 8:50 PM Subject: Re: [PIC] Pb with XP > Michel, > > Here is a long shot - probably not the answer but worth checking out. > > A while back, I remember that someone had a similar problem with software > that would not install and they were from France. The problem was that the > particular software program expected decimal point (.) but the operating > system was setup for comma (,) and it would not install. I can't remember > if this was a Microchip program or something completely different. I > looked through the inf file on my Win98 system and it's full of both commas > and decimal points. > > Hopefully, someone else in France has installed this software sucessfully > and can respond. > Good luck! > Tom > > At 06:52 PM 2/20/04 +0100, you wrote: > >Hello > > > > I have bought ICD2 today and I'm actually trying to install it on my > computer. > >My OS is Windows XP personnal edition. > >I respect the process explaned in the files ddicd2xp.htm about the USB. > >But the installation doesn't accept the .inf file ( step 2 of the > ddicd2xp.htm file) > >I've also tryed the note of the step 2 without succsess > > > >Can you help me > > > > -- > http://www.piclist.com hint: To leave the PICList > mailto:piclist-unsubscribe-request@mitvma.mit.edu > -- http://www.piclist.com hint: To leave the PICList mailto:piclist-unsubscribe-request@mitvma.mit.edu