----- Original Message -----=20
From: "Eisermann, Phil [Ridg/CO]" <peiserma@RIDGID.COM>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Thursday, February 19, 2004 9:19 PM
Subject: Re: [PIC]: Oscillator mode


> > In what mode is the oscillator programmed
> > from the factory on a 16F84 ?
>=20
> they are unprogrammed. That means they are '1'
> See the 'Configuration Bits' in the data sheet
> It says this explicitly.
>=20
> > Must the oscillator always be programmed
>=20
> unless you like the default, yes. On the '84A,
> that would be RC. I imagine the '84 is the same.
> But check the data sheet.
>=20
> > or is there some common word for all possibilitys
> > of oscillators ?
>=20
> I don't know what you mean. How can you have one
> combination that represents all possibilities?
>=20
> My question is:
Can You run the oscillator with a 10 MHz crystal
in default mode (RC) and it works with the right
speed?

Regards
=C5keN
> --
> http://www.piclist.com#nomail Going offline? Don't AutoReply us!
> email listserv@mitvma.mit.edu with SET PICList DIGEST in the body

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu