yah americans are lazy ;->
/me dons kevlar outterware over his nomex undies

-----Original Message-----
From: pic microcontroller discussion list
[mailto:PICLIST@MITVMA.MIT.EDU]On Behalf Of Michael Rigby-Jones
Sent: Wednesday, February 18, 2004 9:24 PM
To: PICLIST@MITVMA.MIT.EDU
Subject: Re: [OT] Static and petrol vapours


>-----Original Message-----
>From: Lee Jones [mailto:lee@FRUMBLE.CLAREMONT.EDU]
>Sent: 18 February 2004 09:13
>To: PICLIST@MITVMA.MIT.EDU
>Subject: Re: [OT] Static and petrol vapours
>
>
>>>> So, when you use these pumps that latch "on"
>
>> The latches have been outlawed here in OZ for quite a number
>of years
>> now ( I don't think I have seen one in about 10 years now),
>we have to
>> hold the lever in or, as much as I disagree with the safety
>aspect, I
>> have seen a small piece of perspex cut to just the right size to jam
>> it in the open position.
>
>For a while, some stations here in the western US didn't have
>the latch mechanism on the pump nozzle.  After a while, sanity
>prevailed and the latches returned.
>
>Anyway, if the pump handle doesn't have a latch mechanism, the
>vehicle's gas cap can frequently be used, in one orientation
>or another, to hold the handle in the "latched on" position
>(and the automatic flow shut-off still works just fine).
>Whish is even simpler than carrying around a pre-cut piece of
>anything. :-)

I have to admitt that I really can't see why the latch is required, is it
really that much of a hardship to hold the trigger in for the few minutes it
takes to fill a tank?  Or am I missing something else that's different
outside that UK?

Mike




=======================================================================
This e-mail is intended for the person it is addressed to only. The
information contained in it may be confidential and/or protected by
law. If you are not the intended recipient of this message, you must
not make any use of this information, or copy or show it to any
person. Please contact us immediately to tell us that you have
received this e-mail, and return the original to us. Any use,
forwarding, printing or copying of this message is strictly prohibited.
No part of this message can be considered a request for goods or
services.
=======================================================================
Any questions about Bookham's E-Mail service should be directed to
postmaster@bookham.com.

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.