try here

http://www.engineeringlab.com/circuitboards.html

they're called schmartboards and I just found the website yesterday

$5 US a board, lots of good stuff on the website.

there is another website if you google for schmartboard you should find it,
I cant remember the like but they only do the US customers at the other
site, this one is global I believe.

Let us all know what they are like if you get some before me.

Cheers

JJ

-----Original Message-----
From: pic microcontroller discussion list
[mailto:PICLIST@MITVMA.MIT.EDU]On Behalf Of Philip Pemberton
Sent: Tuesday, 17 February 2004 9:32 AM
To: PICLIST@MITVMA.MIT.EDU
Subject: [EE]: SSOP28-to-DIP28 adapter?


Hi,
  Has anyone found a method to convert an SSOP-type SMD chip into something
a
bit more manageable?
  I've just managed to destroy a Burr-Brown PCM2902 USB audio CODEC by
trying
to solder it down to a piece of Veroboard with a wiring pen. I did try
making
up an adapter PCB with a retractable knife and a ruler, but only succeeded
in
getting the tracks to lift off the board :-(
  As for etching a PCB - has anyone managed to design an SSOP-to-DIP
converter in the form of a PCB? I've just had a quick go with EAGLE and I
keep running out of space to route the tracks.

Thanks.
--
Phil.                              | Acorn Risc PC600 Mk3, SA202, 64MB, 6GB,
philpem@dsl.pipex.com              | ViewFinder, 10BaseT Ethernet, 2-slice,
http://www.philpem.dsl.pipex.com/  | 48xCD, ARCINv6c IDE, SCSI
... Hmmmmmm... I'm hearing those happy gurgly noises again! :-)

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads