If he contacts me off list, I will help him learn and build up the
source from scratch.

regards

Tony


James Newton, Host wrote:

>Anyone want to quote a price for this job? Please reply to
>dolpepo@in-tch.com
>
>---
>James.
>
>
>
>________________________________
>
>From: The Dolls [mailto:dolpepo@in-tch.com]
>Sent: 2004 Feb 15, Sun 09:41
>To: webmaster@piclist.com
>Subject: I need someone to help me with:
>
>
>I'm very new to PICs.  Is there someone who can code a simple project for
>me?  It consists of the following on a 16F877A at 20 MHz.
>3 Inputs at RA1, 2, and 3 normally held high.  I need to detect when these
>toggle low and the order in which they do so. This sequence then needs to be
>output to three mux'd 7 segment displays.  Also, RA0 toggles an LED on at
>power up, and RA4 flashes an LED at 2 Hz when the timer is armed.  I reset
>the system via a switch on MCLR so there will probably need to be a 1-2
>second delay before the function starts....I think.  I have built the
>circuit and I intended this to be my first PIC programming project but I
>have had no completely functional results from trying to program this
>myself.
>
>That's pretty much all there is to it.  I would just need someone to quote
>me a cost for just the source code. I have the programmer etc. and once I
>get to know what I'm doing I would add some other options.  For now, I would
>just need the functionality described above.
>
>Thanks
>Stephen
>
>--
>http://www.piclist.com hint: PICList Posts must start with ONE topic:
>[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads
>
>

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads