OP said the terminals should have a .15 spacing... but all krone terminals
I've seen have .2" spacing. If that's what the OP means, then:-

rapid electronics, in the UK. www.rapidelectronics.co.uk , download the
catalog pdf "12 Connectors - Terminal blocks", it's on the first page after
the title page. 3 way or 4 way available

Krone IDC terminals Krone
A range of low cost PCB mounting IDC connectors
which dramatically increases wiring productivity by
eliminating the need to strip wire, solder or make
screw terminations. Each contact will accept up to
two wires using the special insertion tool detailed
below which terminates the wire and trims it to
the correct length, providing a neat gas tight
connection. Contacts are arranged on a 5.08mm
pitch. Two fixing posts are provided for heat or ultrasonic staking.


> > ----- Original Message -----
> > From: "Stuart Meier" <stuartmeier@RYG1.FREESERVE.CO.UK>
> > To: <PICLIST@MITVMA.MIT.EDU>
> > Sent: Monday, February 16, 2004 12:28 PM
> > Subject: [EE]: source for Cat5 dual punchdown block
> >
> >
> > > Can anyone suggest a manufacturer/supplier (if the latter,
> > > preferably in
> > the UK)
> > > for a dual (2x4) punchdown terminal block. I expected eg Krone to
> > > make
> > them, but
> > > searched their site in vain.
> > >
> > > To be more precise
> > >
> > > Through hole IDC terminal block
> > > 2 rows of 4 contacts at 0.15" centres with space between rows for
> > > cat5
> > cable,
> > > I have a sample which has a lock-down cap.
> > >
> > > These are extensively used on Cat5 wall outlets, but
> despite this I
> > > have
> > googled
> > > endlessly in vain.
> > >
> > > Stuart Meier
> > >
> > > --
> > > http://www.piclist.com hint: PICList Posts must start with ONE
> > > topic:
> > > [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other
> [BUY]:,[AD]: ->Ads
> >
> > --
> > http://www.piclist.com hint: PICList Posts must start with
> ONE topic:
> > [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other
> [BUY]:,[AD]: ->Ads
>
> --
> http://www.piclist.com hint: PICList Posts must start with ONE topic:
> [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads
>

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads