Farnell do single row eg 107-433 but not two row. I searched RS Connectors and Terminal Blocks sections in vain... StUart ----- Original Message ----- From: "Andrew Seddon" To: Sent: 16 February 2004 12:53 Subject: Re: [EE]: source for Cat5 dual punchdown block > RS/Farnell do them. Not sure of the part numbers tho. I think Krone made them orignially but many have copied. I think the ones I have seen were made by AMP. > > > Andrew Seddon(andrew.seddon@camsig.co.uk) > Cambridge Signal Processing(www.camsig.co.uk) > TEL: 01354 742563 > FAX: 01354 740693 > > > > --- Stuart Meier wrote: > Can anyone suggest a manufacturer/supplier (if the latter, preferably in the UK) > for a dual (2x4) punchdown terminal block. I expected eg Krone to make them, but > searched their site in vain. > > To be more precise > > Through hole IDC terminal block > 2 rows of 4 contacts at 0.15" centres with space between rows for cat5 cable, > I have a sample which has a lock-down cap. > > These are extensively used on Cat5 wall outlets, but despite this I have googled > endlessly in vain. > > Stuart Meier > > -- > http://www.piclist.com hint: PICList Posts must start with ONE topic: > [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads > > -- > http://www.piclist.com hint: PICList Posts must start with ONE topic: > [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads -- http://www.piclist.com hint: PICList Posts must start with ONE topic: [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads