TX Dom, unfortunately they say they don't do pcb components.
StUart
----- Original Message -----
From: "Dominic Stratten" <dominic.stratten@NTLWORLD.COM>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: 16 February 2004 12:37
Subject: Re: source for Cat5 dual punchdown block


> Try these people - I've had a quick search and I'm pretty sure its who I've
> used in the past for some "hard to get" networking kit.
>
> Connexions (uk) Plc
> Unit 3
> Travellers Close
> Hatfield  01707272091
> http://www.cxcxcx.com/index2.html
>
> Worth giving them a quick call
>
> Regards
>
> Dom
> ----- Original Message -----
> From: "Stuart Meier" <stuartmeier@RYG1.FREESERVE.CO.UK>
> To: <PICLIST@MITVMA.MIT.EDU>
> Sent: Monday, February 16, 2004 12:28 PM
> Subject: [EE]: source for Cat5 dual punchdown block
>
>
> > Can anyone suggest a manufacturer/supplier (if the latter, preferably in
> the UK)
> > for a dual (2x4) punchdown terminal block. I expected eg Krone to make
> them, but
> > searched their site in vain.
> >
> > To be more precise
> >
> > Through hole IDC terminal block
> > 2 rows of 4 contacts at 0.15" centres with space between rows for cat5
> cable,
> > I have a sample which has a lock-down cap.
> >
> > These are extensively used on Cat5 wall outlets, but despite this I have
> googled
> > endlessly in vain.
> >
> > Stuart Meier
> >
> > --
> > http://www.piclist.com hint: PICList Posts must start with ONE topic:
> > [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads
>
> --
> http://www.piclist.com hint: PICList Posts must start with ONE topic:
> [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads