Gary,
The chip you want to look at is the ADE7754, sorry about that
They do have a built up evaluation board using the chip for $250

Scott


At 05:18 AM 2/15/04, you wrote:
>Guys,
>
>I've got to measure the input power to an industrial 3 phase, 460V, 25hp
>electric motor.  I'm running a test using the motor as a driver and trying
>to get an idea for efficiency of the mechanism I'm driving with the
>motor.  I'll be running at basically the exact same speeds/loads for all
>conditions.
>
>Anyone know of some type of meter that measures input current, voltage,
>(and power) for this type of setup for relatively cheap (less than a couple
>$k).  Ideally it would be able to output these values (RS232 or similar)
>for data acquisition purposes over a test that'll run ~2 weeks continuous.
>
>Thanks,
>
>Gary
>
>--
>http://www.piclist.com hint: To leave the PICList
>mailto:piclist-unsubscribe-request@mitvma.mit.edu

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu