Thanks everyone.
Hall effect sensors from www.lem.com look nice,
otherwise decided on 50W 0.01 Ohm resistor from Vishay.



-----Original Message-----
From: pic microcontroller discussion list
[mailto:PICLIST@MITVMA.MIT.EDU]On Behalf Of David Schmidt
Sent: February 12, 2004 4:47 PM
To: PICLIST@MITVMA.MIT.EDU
Subject: Re: [EE:] Current sensor


I believe there are off the shelf hall effect current sensors (pass the wire
through a loop) that will output a conditioned signal.
Just in case you didn't want to buy and add in your own current shunt.

Dave

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics