> Just finished the new PCB layout. Has USB B and 5 pin ICSP connector.
> Not sure about beefing up the 13V rail and keeping it
> uncomplicated. At
> the moment it's just a simple voltage tripler generated by the 16F628
> hardware.

I think that might fail on a 16C84 when the USB power is at the lowest
level allowed by the spec.

Wouter van Ooijen

-- -------------------------------------------
Van Ooijen Technische Informatica: www.voti.nl
consultancy, development, PICmicro products

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads