Maybe you needed pull-ups on the PGD and PGC lines - on the target side?

Rgs
Ian

> -----Original Message-----
> From: pic microcontroller discussion list
> [mailto:PICLIST@MITVMA.MIT.EDU]On Behalf Of Ken Pergola
> Sent: Monday, 9 February 2004 11:21 am
> To: PICLIST@MITVMA.MIT.EDU
> Subject: Re: [PIC]: PIC programmer puzzle
>
>
> Or going to the other extreme:
>
> You had two ICSP cables -- one was wired straight-through and
> the other was
> wired crossed?
>
> Best regards,
>
> Ken Pergola
>
> --
> http://www.piclist.com hint: The PICList is archived three different
> ways.  See http://www.piclist.com/#archives for details.

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.