---- START NEW MESSAGE ---
Received: from cherry.ease.lsoft.com [209.119.0.109] by dpmail10.doteasy.com with ESMTP
  (SMTPD32-8.05) id A53B3830003C; Fri, 30 Jan 2004 04:59:39 -0800
Received: from PEAR.EASE.LSOFT.COM (209.119.0.19) by cherry.ease.lsoft.com (LSMTP for Digital Unix v1.1b) with SMTP id <1.00CC4B0D@cherry.ease.lsoft.com>; Fri, 30 Jan 2004 7:59:29 -0500
Received: from MITVMA.MIT.EDU by MITVMA.MIT.EDU (LISTSERV-TCP/IP release 1.8e)
          with spool id 7699 for PICLIST@MITVMA.MIT.EDU; Fri, 30 Jan 2004
          07:59:23 -0500
Received: from MITVMA (NJE origin SMTP@MITVMA) by MITVMA.MIT.EDU (LMail
          V1.2d/1.8d) with BSMTP id 7263; Fri, 30 Jan 2004 07:59:14 -0500
Received: from smtp-out2.xs4all.nl [194.109.24.12] by mitvma.mit.edu (IBM VM
          SMTP Level 430) via TCP with ESMTP ; Fri, 30 Jan 2004 07:59:12 EST
X-Comment: mitvma.mit.edu: Mail was sent by smtp-out2.xs4all.nl
Received: from PAARD (a213-84-20-53.adsl.xs4all.nl [213.84.20.53]) by
          smtp-out2.xs4all.nl (8.12.10/8.12.10) with ESMTP id i0UCx7ZJ006538
          for <PICLIST@MITVMA.MIT.EDU>; Fri, 30 Jan 2004 13:59:08 +0100 (CET)
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
X-Priority: 3 (Normal)
X-MSMail-Priority: Normal
X-Mailer: Microsoft Outlook, Build 10.0.3416
X-MIMEOLE: Produced By Microsoft MimeOLE V6.00.2600.0000
Importance: Normal
Message-ID:  <003701c3e730$da8ac5c0$0b00a8c0@PAARD>
Date:         Fri, 30 Jan 2004 13:59:10 +0100
Reply-To:     pic microcontroller discussion list <PICLIST@MITVMA.MIT.EDU>
Sender:       pic microcontroller discussion list <PICLIST@MITVMA.MIT.EDU>
From:         Wouter van Ooijen <wouter@VOTI.NL>
Organization: Van Ooijen Technische Informatica
Subject: Re: [PIC:] Programming interface
To:           PICLIST@MITVMA.MIT.EDU
In-Reply-To:  <006201c3e72f$d2916910$080044c0@BrianBoru>
Precedence: list
X-RCPT-TO: <mailinglist2@FARCITE.NET>
Status: U
X-UIDL: 371856488

> There is lots of
> free software to program the 877, not so the 877A.

Not that much, but IIRC ic-prog does the 877A. The hardware is the same
(apart from LVP pull-down, Vpp-or-Vcc first issues, and some variation
in Vpp voltage it is the same for all flash PICs), it is just the PC
software that must be adapted to the specific PIC.

Wouter van Ooijen

-- -------------------------------------------
Van Ooijen Technische Informatica: www.voti.nl
consultancy, development, PICmicro products

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body

.