> Coincidence or not, only an hour after I wrote this today I
> received a sample 16F767. Its deviceID reads as 0x0EA1.
> According to the programming specifications (ds30492a.pdf)
> and the errata (ds80177a.pdf) this is an 16F777!!
> But it really is 28 pins DIP....


Hi I'm not "into" programmers, I'd just like to understand...

What is the difference, from the programmers point of view,
between programming a 28pin device and a 40pin device ?
If everything else is the same.

As far as I can see from the line card the 16F767 and 777 have
the same amount of flash, no eeprom and so on.

Jan-Erik.

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads