On Tue, 27 Jan 2004 18:12:15 +0000, you wrote:

>On Tue, 27 Jan 2004 09:51:20 -0800, you wrote:
>>- Is the in-circuit programming of the 16F627A the same hookup, =
voltages and algorithm that the picstart plus uses?
>>(can I just jumper over the 5 pins needed for in-circuit programming =
from the picstart plus?)
>>
>I did that for a 16F74 and it worked fine. Make sure you don't have any
>electrolytics or tantalum capacitors on the VDD line to the PIC, the =
picstart
>doesn't have the power to charge those fast enough.

if Vcc is loaded, you can supply an external 5V for Vcc and this usually =
works OK, for all but the
8-pin devices, which need VCC on/off control.

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads