That is the size wire that is used on radio control servos. You might back track from the modeling suppliers. When I first became acquainted with the connectors used in that application I was skeptical, but my experience with them has been positive. John Ferrell 6241 Phillippi Rd Julian NC 27283 Phone: (336)685-9606 johnferrell@earthlink.net http://DixieNC.US NSRCA 479 AMA 4190 W8CCW "My Competition is Not My Enemy" ----- Original Message ----- From: "John Pearson" To: Sent: Saturday, January 24, 2004 11:20 AM Subject: [EE:] Small wire and plug source I am looking for a supple 22 gauge wire. The wire I am currently using is very stiff and not easy to work with. Any recommendations on what wire to try. Also, I am currently using the Molex/Waldom .100" connector housings and clips. I find them to be a little sloppy and their precarious fit on a header does not give me a lot of confidence in the connection. Not to mention the clips often push out of the housings. Any recommendations for a better, tighter fitting connector? Thank you in advance John -- http://www.piclist.com hint: The PICList is archived three different ways. See http://www.piclist.com/#archives for details. -- http://www.piclist.com hint: The PICList is archived three different ways. See http://www.piclist.com/#archives for details.