I have just breadboarded the frequency meter and am having trouble getting 5 volts at the collector of the 2n4403. Any idea what could be amiss? ----- Original Message ----- From: "p.cousens" To: Sent: Saturday, August 23, 2003 4:40 PM Subject: Re: weeder freq counter It's the first time I have heard this, when I ported the code for the 16f84 I tested it on a working unit and have used it many times. I personally have not tried it on the A version The only thing I was never too happy with was the input stage, it's a bit deaf But the software never gave me a problem I think you need to have a closer look at your hardware Have you checked the crystal is oscillating? Peter Cousens cousens@biscit.biz > -----Original Message----- > From: pic microcontroller discussion list [mailto:PICLIST@MITVMA.MIT.EDU] On > Behalf Of Larry N0SA > Sent: Saturday, August 23, 2003 12:32 AM > To: PICLIST@MITVMA.MIT.EDU > Subject: PIC: weeder freq counter > > I have just built the weeder freq. counter as found in piclist archives. It is not > functioning with software off the site. It seems there is a problem with the software. > Any help is appreciated. It is totally nonfunctional-no readout. All wiring and anologue > section seems to work fine. > Larry > > -- > http://www.piclist.com hint: The PICList is archived three different > ways. See http://www.piclist.com/#archives for details. -- http://www.piclist.com#nomail Going offline? Don't AutoReply us! email listserv@mitvma.mit.edu with SET PICList DIGEST in the body -- http://www.piclist.com hint: The PICList is archived three different ways. See http://www.piclist.com/#archives for details.