zignorii <PICLIST@mitvma.mit.edu> wrote:

> my plan is to bild a device, that scans 10 buttons on the
> transmitter module, sends it via rf to the receiver and the
> receiver should talk to the pickit1 (where it sticks in). Connected
> to the PC the picKit1 should act as a USB-keyboard device which
> presses the numerical keys (0-9) corresponding to the pressed
> buttons on the transmitter
> ....
> did anybody something similar already?

    Must it use the RFPIC?

    -Andy

=== Andrew Warren -- aiw@cypress.com
=== Principal Design Engineer
=== Cypress Semiconductor Corporation
===
=== Opinions expressed above do not
=== necessarily represent those of
=== Cypress Semiconductor Corporation

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads