On Thu, Jan 22, 2004 at 04:26:30PM -0200, Rafael Vidal Aroca wrote:
>         Yes, please! It would be REALLY nice if you can provide linux tool for this bootloader.
>
>         As i said in my first mail, i just adjusted the register names and got the loader running. At this exact moment i was working on a expect script to control the bootloader from linux. But as you already wrote such code, could you provide that? I'd be really thankful.


OK, here ya go:
http://cockpit.varxec.de/software/an851.tar.bz2
or
http://cockpit.varxec.de/software/an851.zip (for those on non-unix platforms)

it contains the .asm file,
and the linux based controller software.
the controller does not do all the commands right now, just
reading/writing to flash, erasing flash and reset.

I have some older pieces of C code that do those other commands as well,
just not cleaned up and integrated in the above version yet.

Ohhh, and something to note: the built-in "delay" is just a for loop, so
it might or might not work on your computer. I'm running on a PII 700.



Regards,
Manuel

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads