A couple of op amps to scale the 0-5 volt input to the 10 to .3v output
 should do it.

                                             Regards,

                                               Jim


> I need to convert a 0V to +5V DC signal to a +0.3V to +10V signal.
>
> Here comes the tricky part, When the signal is +5V the output needs to
> be +0.3V. When the signal is 0V I need the output to be +10V. I am not
> sure how to approach this type of circuit, any ideas would be greatly
> appreciated.
>
> Thanks.
>
> Steve
>
>
> ---------------------------------
> Do you Yahoo!?
> Yahoo! SiteBuilder - Free web site building tool. Try it!
>
> --
> http://www.piclist.com hint: PICList Posts must start with ONE topic:
> [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads