This mail was re-sent because of an uncomplete topic tag....sorry

hello,
I am new to the list...
i bought the rfpic dev kit a few days ago.
it consists out of a pickit1 (USB) and two receiver and two transmitter
modules

my plan is to bild a device, that scans 10 buttons on the transmitter
module, sends it via rf to the receiver and the receiver should talk to =
the
pickit1 (where it sticks in). Connected to the PC the picKit1 should act =
as
a USB-keyboard device which presses the numerical keys (0-9) =
corresponding
to the pressed buttons on the transmitter...
a similar demo program called "presentation pal" is provided with the =
kit.

the PIC16C745 with the flashloader firmware on the PICkit1 must be =
replaced
by another one, programmed to run the USB Keyboard code. It must also =
talk
to the receiver module, of course...

did anybody something similar already?

regards,
Joa


--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads