Over the past few months DigiKey has begun carrying lower priced LCD's,
similar in price to the crystalfontz outfit mentioned.  I suspect, however,
you will end up paying a premium for the 2x7 pattern .... it seems as though
most of the lower priced models have the 1x14 format.  What seems even
stranger is that where on the circuit board you want those 14 pins seems to
make a very big difference in price.

If you are not familiar with DigiKey they tend to have prices on the lower
side, although rarely the lowest, but have customer service second to none.

72/73 de WB8RCR    http://www.qsl.net/wb8rcr
didileydadidah     QRP-L #1446 Code Warriors #35

----- Original Message -----
From: "al smith"
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Wednesday, January 21, 2004 6:25 PM
Subject: [PIC]: 8 bit LCD module recommends


> I have a small group of testers (as my previous post was looking at doing
a
> load test) and need a few off the shelf LCD (2x16 or so) that have a 14
pin
> (2x7) hole pattern.  Ive used a few before, typically surplus, but I need
a
> real source for these now.  Anyone have a favorite?
>
> _________________________________________________________________
> Check out the coupons and bargains on MSN Offers!
> http://shopping.msn.com/softcontent/softcontent.aspx?scmId=1418
>
> --
> http://www.piclist.com hint: To leave the PICList
> mailto:piclist-unsubscribe-request@mitvma.mit.edu
>

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu