Hi Jan-Erik and others, I just put up on web what I got this far ready with pong game for 12f675. Hardware is ready and PAL test image is displayed. Now writing the game logic.. may take a while, I'll have to start with other projects now. A/D input side - the paddles - is completely untested. And it is not yet proven that there are enough cycles in 4MHz osc for the game.. http://www.iki.fi/hyvatti/pic/pong/ Parts list: 1x 12f675 1x 100 nF 1x 100 kohm 2x 10 kohm 1x 220 ohm 1x 560 ohm 1x 9P male D-connector for Commodore 64 paddles 1x RCA female for video output 1x 2xAA or 2xAAA battery case Jaakko -- Foreca Ltd Jaakko.Hyvatti@foreca.com Pursimiehenkatu 29-31 B, FIN-00150 Helsinki, Finland http://www.foreca.com -- http://www.piclist.com hint: To leave the PICList mailto:piclist-unsubscribe-request@mitvma.mit.edu